This issue may be caused by: The material sensor being blocked A mainboard malfunction Please try the following steps: Go to Settings Disable the “Auto Loading&rdq...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position. - Step 1: Press and hold the power button for 20 seconds to restart the mac...
"This issue is usually caused by an incorrect language setting or an incomplete language pack download. Please follow the steps below to resolve it: Open Settings on your device...
If the sensor is not working, please follow these steps: 1. Check Auto-loading setting Go to Settings and check if the “Auto-loading” option is disabled. If it is di...
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches: Replace the Sensor If the senso...
"This issue can be caused by several reasons: Low Cutting Pressure Check your cutting pressure settings. If the pressure is too low, the blade holder won’t drop enough to tou...
"Network latency is often unavoidable in cross-border communications. To ensure stable device usage, we provide multiple alternative network routes. In certain cases, you may enco...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
If the film is being cut crookedly or the cutting position is inaccurate, further inspection is required. Please click the WhatsApp button below and send our technical support tea...
"If the machine is unable to cut screen protector materials properly, please first try the following steps: Replace the blade and blade holder with new ones. Set the cutting pre...
If the machine is making a constant or continuous noise, please try a hard reset first: Press and hold the power button for 20 seconds to reset the machine. If the noise continue...
"If the 180T screen protector cutting machine displays a “Reconnection” message after startup, it is likely that there is an issue with the system firmware. You can resolve this by...
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard. This situati...
This issue is usually caused by corrupted cached data in the system. Please follow the steps below: Clear the APP cache Follow the method shown in the video to clear the Cutter...
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally. Common causes include a stuc...
This issue is usually caused by corrupted cached data in the system（Please note that the following method only applies when the model list is not displayed at all.）. Please foll...
If the machine displays a “Time Out” error during film cutting, please follow the steps below: 1. Check whether the motherboard is connected On the machine, go to:...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
