Showing 191 results
for
"restart machine"
MTB-CUT 180T
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps:
Restart the machi...
MTB-CUT 180T
"If the machine is continuously beeping and not working properly, please try the following steps:
Force Restart: Press and hold the power button for 20 seconds to force the machine...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT 180T
"Communication failure with the machine is typically caused by network issues or a mainboard malfunction.
When encountering this problem, please try the following steps:
Reconne...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
"Error 1002 indicates a serial communication error within the machine.
If you encounter this issue, please try the following steps:
Reconnect to Wi-Fi and restart the device...
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
"A slow APP startup is usually caused by excessive cached data slowing down performance. You can try the following steps:
Clear the Cache: Follow the steps shown in the video to go...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
If the machine stops working after performing an update, it is usually caused by incomplete data download during the update process.
You can try the following steps:
Clear the...
MTB-CUT 180T
"This issue is usually caused by an incorrect language setting or an incomplete language pack download.
Please follow the steps below to resolve it:
Open Settings on your device...
MTB-CUT 180T
"The machine’s software version depends on the release of new features.
As of October 2025, the latest APP version is 3.0.05.
Tips:
You can check or update your version by foll...
MTB-CUT M188
A “Time Out” message usually means that there is a communication failure between the screen and the mainboard. This can be caused by:
Loose or Damaged Screen Cable
Op...
MTB-CUT 180T
This is a network issue, meaning the current network’s DNS cannot resolve the server address.
Please try the following steps:
Switch to a different network
Connect the mac...
MTB-CUT 180T
"To restore the machine settings, follow these steps:
Restart the device
As the machine is starting up, quickly tap the blue icon 10 times
Select "Factory Reset"
Please no...
MTB-CUT 180T
"English Version
If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons:
Template too large
It’s re...
Showing 1
to 20
of 191 results
